ssh pi@retropie.localDefault password is "raspberry" and edit the boot options
sudo nano /boot/cmdline.txtYou will see a single line with all the boot options. Scroll along and change the following making sure not to add any linebreaks:
- - Replace "console=tty1" by "console=tty3" to redirect boot messages to the third console.
- Add "loglevel=3" to disable non-critical kernel log messages.
- Add "logo.nologo" to the end of the line to remove the Raspberry PI logos from displaying
Press CTRL+X to exit and Y to save your changes.
Next edit the config file with the following:
sudo nano /boot/config.txt
- - add "disable_splash=1" at the end of the file.
Press CTRL+X to exit and Y to save your changes.
There you go. When it boots up now, it will just cleanly display the Retropie screen (or Wermy's bootup video if you go with that).
Không có nhận xét nào:
Đăng nhận xét